A DIY Guide to Replace Tail Lights at Home
Often times, if anything goes wrong with your car, your first instinct is to take it into the shop. Unless you are a âcar personâ, the idea of doing our own auto repairs is not only incredibly daunting, but it just doesnât register as an option. And thatâs a completely fair position; an amateur has no reason to be trying to fix their transmission or diagnose a check engine light on their own. However, there are certain fixes that can be accomplished by an amateur, as long as they are careful and follow a guide. Having a tail light go out is one of those issues. Taking care of it yourself can save you literal hundreds of dollars, as instead of paying auto shop prices for parts and service, all you have to do is grab a bulb and a few tools and take care of it yourself. Hereâs a detailed guide on how to replace your own tail lights in your own driveway or garage.
Step 1: Acquire the Proper Tools and Materials
The main things that youâll need for this job will be a screwdriver and, possibly, a socket wrench. Youâll also need to acquire a bulb that matches the one you need to replace. Itâs possible, however, that you wonât actually know which type of bulb you need until you get to that point in the replacement process; if that is the case, then thatâs okay. It just means youâll need to take care of it down the line. If the vehicle is old or if the screws/bolts in question are particularly stubborn, you might want to get some WD-40 as well, to help you loosen what you need to.
Step 2: Identify Which Bulb is Burnt Out
To do this, youâll need to turn the car on, but not the engine on (or at least, you donât need to have the engine on). With the car in park, step out and examine the vehicle carefully. If itâs a blinker thatâs supposedly out, turn on the carâs hazard lights. This is, of course, if youâve been informed a light is out and are not sure which one. Itâs good practice to get into to check every once in a while, however, in order to forestall issues with the tail light arising unexpectedly. Once youâve identified the proper bulb, you may turn the car off.
Step 3: Identify if the Light is Easy Access
Some cars, especially newer models, have easy access lights to make much of this process unnecessary. Instead of having to get at the light through the housing on the outside, you can access the light in these models from the inside. Check to see if thereâs an area on the inside of the trunk where you can access the tail light; generally, these will be covered up by either a panel or a flap. If you can get at the light from here, then you can skip the next two steps and jump right to Step 6: Unscrew the Back of the Bulb.
Step 4: Unscrew the Housing for the Tail Light
None of the colored lights on your car have colored bulbs. Instead, theyâre all kept behind colored lenses, to achieve the colored light effect. The first thing that youâre going to need to do is to get at the burnt out bulb, so youâll need to remove the entire lens housing. Generally, these will be held in place with Phillips head screws, so youâll need a Phillips screwdriver for the job. Sometimes, however, there will be bolts instead of screws, and youâll need to use a socket wrench instead. If you need to acquire tools for the job, try to make sure exactly what you need to get the housing off before you go out and purchase them. Whatever is holding the housing in place, make sure that the screws or bolts that you remove are stored in a safe place, or youâll have to go out and buy exact replicas.
Step 5: Pull the Housing Out
Once the screws are out, the housing will pretty much be resting inside the car. The next thing youâll want to do is pull the housing out of the hole that itâs in. You canât yank it out, since housing will still be attached to the car via wiring, and you wonât be able to pull it very far out for the same reason. You really just need to pull it out enough to access the housing so that youâre able to work on it.
Step 6: Unscrew the Back of the Bulb
Generally, the bulb of the light will be held in place by being screwed into the assembly. From here, youâll need to reach behind the back of the bulb and unscrew the bulb manually, by hand. Some housing units will contain more than one bulb, so make sure that youâre unscrewing the correct one. The bulb that youâre unscrewing will be the part that connects the wires to the lens housing, so if youâre having trouble finding it, follow the wires with your hand. You donât need to unscrew it a great deal, either; it will only require a quarter turn or so counterclockwise to unseat the bulb casing.
Step 7: Remove the Burnt Out Bulb
Once youâve got the bulb casing completely detached from the lens housing, you can actually access the bulb itself. If you had to turn the lights on recently to find the right bulb, then there is a good chance that the bulb will be hot to the touch. Make sure itâs not going to burn you before you grab it. Once the bulb is cool, you can remove it from the bulbâs plug; the plug should still be attached to the wires, but the bulb will come out completely.
Step 8: Identify the Proper Replacement Bulb
If you already knew before you started the process which bulb you would need to replace it with, then you can go ahead and skip this step. Often, however, it can be impossible to pick the correct bulb without knowing exactly what model you need to replace it with. There are two different ways of accomplishing this: either you can match the numbers on the base of the bulb to the numbers on a replacement bulb to make sure they are the same type, or you can walk into an auto shop and hand the bulb to one of the people working there and ask them to guide you to the proper bulb. The second option is generally going to be the preferred option for amateurs, as matching the small numbers on the base of bulbs can be a tedious task.
Step 9: Install the New Bulb
Once youâve found the proper replacement bulb, you can slide that into the base of the bulb just like you popped the other one out. Some would recommend that you apply a tiny bit of dielectric grease to the tip of the bulb before you insert it into the base, but there is some debate by experts in the field as to whether this is really necessary. You will likely suffer no negative consequences if you donât apply the grease, but if you feel like it is necessary,Â go ahead.
Step 10: Mount the Bulb
Once the bulb is placed firmly in the socket, you can replace it into the housing just like it was removed, by inserting it in the lens housing and turning it a quarter turn clockwise. That should lock it in place in the housing.
Step 11: Test the Light
Youâre almost done, but before you finish up, youâre going to want to test it out, to make sure that you donât have to go through the entire process again. If youâre with someone, have them watching while you turn the key in the carâs ignition. Otherwise, just turn the car on and then pop out yourself to make sure that the light is working. If it is, youâre all good, if not, you might have done something wrong, or you might be in need of a new bulb.
Step 12: Mount the Housing Lens
Finally, you can finish up the job. Slide the housing lens back into the gap in the car where it came from, and then tighten it to hold it in place with those screws or bolts you stored carefully and definitely didnât lose.
Hopefully, youâre now completely comfortable taking care of a tail light on your own. If you still donât feel like you should even after reading the guide, however, make sure you donât ignore it. Tail lights feel like a very small problem, but you could easily get pulled over and slammed with a hefty ticket if you neglect to fix yours. And thatâs not the worst that can happen; if you merge into a lane thinking that you signaled but the person in that lane didnât see, that is a very easy way to cause an accident. Do yourself a favor and check your tail lights every now and again, just to nip the problem in the bud before it causes a real issue.
- Auto MD – How to Replace a Brake Light Bulb
- Thought Co – Replace Your Car’s Burnt Out Bulbs in 4 Simple Steps
- Family HandymanÂ – Tail Light Replacement Made Easy